VIGA Korere Kaihanga 
Faucets are divided into basin faucets, Nga ranu kaukau, thermostatic faucets, etc. The maintenance methods of these different types of faucets are also slightly different.
Bacucet basin
When buying a single-handle basin faucet, you should pay attention to the diameter of the outlet. Except for TOTO basins, most of them are national standard products on the market. Most of GROHE’s basin faucets are hard pipe water inlets, so you should pay attention to the height of the upper nozzle, 35 working points** from the basin down is appropriate. I te wa i te whakaurunga, an angle valve dedicated to Grohe must be selected, A me whakatika te waha Angle ki nga putorino wai wera me te makariri mai i te pakitara. Ka kitea e koe he tawhiti kei waenganui i te waha o te koki me te putorino wai i runga i te kirikiri, go to your store at the time to purchase a special extension pipe for the GROHE faucet to connect it.
Mahara, Kaua e whakamahia e koe etahi atu putorino wai kia honoa, Na te mea mena he tiketike te pehanga wai, Ka ngawari te hinga, ka rewa te wai, ka raru koe. Mena he roa rawa te putorino o te kopata ki te neke atu i te putorino, the part can be cut off according to your needs. Mena kaore i te tika te koki, you can bend it to the position you need. Mahara: Don’t bend to 90 degrees or greater than hard. When installing the basin to drain, please do not forget to purchase the small connector of the faucet (short-circuit the faucet).
Hōroi ringiringi, CAUPTUB FAUCET (wall hanging)
After you buy a shower, tāpu kaukau, or wall-mounted faucet, you can choose a suitable height to bury the water pipe. The distance between the hot and cold water pipes must reach 15 work points. You must not forget to flush the water pipe before installation to avoid excessive water quality and damage to the faucet. If the elbow between the faucet and the wall joint is too long, you can cut off a part of the 4-point wire. Mahara: the 6-point wire connected to the faucet does not seem to be cut randomly.
Concealed shower, CAUPTUB FAUCET
I muri i te hoko i tetahi kirikiri huna, Ko te Core a Forve o te Fauceet i te nuinga o te wa i tanumia i mua i te pakitara. Kia mahara ki te whakarongo ki te matotoru o te pakitara kaukau i mua i te awhi. Mena he angiangi te pakitara, the spool cannot be embedded. Do not remove the plastic protective cover of the valve core easily when embedding, so as not to damage the valve core due to cement and other chores. I tua atu, you should pay attention to the up and down, left and right directions of the spool when embedding the spool to avoid the wrong spool.
Honu kaukau
After you install the shower and bathtub faucets, don’t forget the filter in the shower pipe when you need to install the shower. When installing the shower, the water pressure must not be too high, generally 1&mDASh;—3 kg is the best, not more than 5 kg. If the water pressure is too high, the water flow restrictor in the valve core of the faucet can also be opened to reduce the water pressure, which can also achieve the effect of water saving.
Te kirikawaititini
Tuhinga o mua, please check whether the water pipe is hot on the left and cold on the right. Remember not to connect the hot and cold water pipes wrongly to prevent the faucet from not working properly. Kaore e taea e nga kaimoana wai te whakamahi i nga tiihi waiariki na te mea he iti rawa te pehanga wai. Don’t forget to install the hot and cold water filter when installing the thermostatic faucet.
Daily maintenance
In the process of using the faucet, it is necessary to frequently maintain and clean the scale on the surface of the faucet and the water sand in the spout to protect the chrome layer on the surface of the faucet as bright as new (GROHE special cleaning fluid, special cleaning cloth). Do not use rough towels and cloths to wipe the faucet, so as not to scratch the chrome layer, and do not touch the faucet with acid-alkaline items to avoid destroying its brightness.