VIGA усны цорго үйлдвэрлэгч 
Faucets are divided into basin faucets, шүршүүрт орох усны цорго, thermostatic faucets, гэх мэт. The maintenance methods of these different types of faucets are also slightly different.
Газрын цорго усны цорго
When buying a single-handle basin faucet, you should pay attention to the diameter of the outlet. Except for TOTO basins, most of them are national standard products on the market. Most of GROHE’s basin faucets are hard pipe water inlets, so you should pay attention to the height of the upper nozzle, 35 working points** from the basin down is appropriate. Суулгах явцад, an angle valve dedicated to Grohe must be selected, өнцгийн хавхлагыг хананаас халуун, хүйтэн усны хоолойнд бэхлэх ёстой. Энэ нь та усны цорго, усны хоолойны өнцөг ба усны хоолойн хоорондох зай байна, go to your store at the time to purchase a special extension pipe for the GROHE faucet to connect it.
Санах, Та холбогдохын тулд бусад усны хоолойг ашиглах ёсгүй, Учир нь усны даралт өндөр байвал, Энэ нь амархан унах, гоожих болно, алдагдахад хүргэдэг. Хэрэв оролтын хоолой нь гаднах хоолойноос хэт урт байвал, the part can be cut off according to your needs. Хэрэв өнцгийг тохирохгүй бол, you can bend it to the position you need. Санах: Don’t bend to 90 degrees or greater than hard. When installing the basin to drain, please do not forget to purchase the small connector of the faucet (short-circuit the faucet).
Шүршүүр, Усан онгоцны төлбөр с таваа тогор (wall hanging)
After you buy a shower, үгаалгын онгоцонд усанд орох, or wall-mounted faucet, you can choose a suitable height to bury the water pipe. The distance between the hot and cold water pipes must reach 15 work points. You must not forget to flush the water pipe before installation to avoid excessive water quality and damage to the faucet. If the elbow between the faucet and the wall joint is too long, you can cut off a part of the 4-point wire. Санах: the 6-point wire connected to the faucet does not seem to be cut randomly.
Concealed shower, Усан онгоцны төлбөр с таваа тогор
Нуугдсан усны цорго худалдаж авсны дараа, Усны цоргоны хавхлагын цөм нь ерөнхийдөө хананд урьдчилан булсан байдаг. Be sure to pay attention to the thickness of the bathroom wall before embedding. Хэрэв хана хэт туранхай байвал, the spool cannot be embedded. Do not remove the plastic protective cover of the valve core easily when embedding, so as not to damage the valve core due to cement and other chores. Үүнээс гадна, Та дээш, доошоо анхаарлаа хандуулах хэрэгтэй, дамарыг буруу дампууруулахаас зайлсхийхийн тулд дамарыг оруулахгүй байх үед зүүн ба баруун чиглэлийн чиглэл.
Усан зуух шавын ангилал
After you install the shower and bathtub faucets, don’t forget the filter in the shower pipe when you need to install the shower. When installing the shower, the water pressure must not be too high, generally 1&mDASh;—3 kg is the best, not more than 5 кг. If the water pressure is too high, the water flow restrictor in the valve core of the faucet can also be opened to reduce the water pressure, which can also achieve the effect of water saving.
Thermostatic faucet
Термостатик усны цорго суулгахаас өмнө, please check whether the water pipe is hot on the left and cold on the right. Remember not to connect the hot and cold water pipes wrongly to prevent the faucet from not working properly. Хий, нарны ус халаагч нь термостатик усны цоргыг ашиглах боломжгүй тул усны даралт хэт бага байна. Don’t forget to install the hot and cold water filter when installing the thermostatic faucet.
Daily maintenance
In the process of using the faucet, it is necessary to frequently maintain and clean the scale on the surface of the faucet and the water sand in the spout to protect the chrome layer on the surface of the faucet as bright as new (GROHE special cleaning fluid, special cleaning cloth). Do not use rough towels and cloths to wipe the faucet, so as not to scratch the chrome layer, and do not touch the faucet with acid-alkaline items to avoid destroying its brightness.