Karka damu da tsinkaye a cikin minti uku

Mutane da yawa suna fuskantar faduwa ko faɗakarwa a cikin gidajensu. Yawancin mutane ba sa kula da shi da farko, kuma jin cewa digo ko biyu na ruwa ba babban ciniki bane. Amma a zahiri, Wannan babu shakka ya haifar da bata lokaci mai kyau. Idan kun ga cewa famfon a gida yana haifar, Ya kamata ku ci lokaci don nemo dalilin. Idan ba babbar matsala bane, Kuna iya warware shi da kanku. A ƙasa, Edita zai gabatar da yawancin mafita ga ciyawar ciyayi.

1. Abubuwa uku na yau da kullun ruwa da kuma haifar da bincike

1. Sanadin lalacewar ruwa a kan abin hawa

Wannan shi ne saboda sutturar shaft a cikin famfon ruwa. Yi amfani da filaye don sassauta glandar da cire shi, fitar da iskar shaft tare da matsa, kuma maye gurbinsa da sabon kayan shaft.

2. Sanadin zubar da ruwa a cikin ƙananan gibin na famfo

Wannan shine ya haifar da sakin gas na triangular a cikin gland. Zaka iya sassauta dunƙule don cire shugaban aron, sannan sassauta kuma cire gland, Sannan a fitar da hatimi na alwatika a cikin gland da maye gurbin da sabon.

3. Lantarki na ruwa a cikin hadin gwiwa

Kusan goro yana kwance, zaku iya sake tsayar da goro ko maye gurbin da sabon jirgin ruwan U-mai siffa.

Na biyu, mafita ga lalatattun abubuwa daban-daban

1. Leakying turawa-type

Shirya kayan aikin: majuyin suruku, Cikin Sa Sauke Sauki, zame cikin haɗin gwiwa ko daidaitawa mai daidaitawa da kuma an maye gurbinsu.

Matakan Gyara:

Taka 1: Rufe bawul na wanke ruwa. Cire ƙananan sukurori a kan ko a bayan famfon hawa don cire rike da gyaran a jikin famfon ruwa. An ɓoye wasu scals a ɓoye a ƙarƙashin maɓallin ƙarfe, Button filastik, ko zanen gado, wanda snap a cikin ko dunƙule cikin rike. Muddin ka kunna maballin, Za ku ga abin da aka makala a saman.

Taka 2: Cire rike da kuma duba sassan famfon. Yi amfani da manyan abubuwan haɗin gwiwar da aka yi amfani da su ko haɓaka daidaitawa don cire fakitin fakiti, Yin hankali da karbuwa da karfe. Juya spool ko shaft a cikin wannan shugabanci kamar yadda lokacin da ka kunna a kan famfon da ba a kafa su ba.

Taka 3: Cire dunƙule mai riƙe da Washer. Idan ya cancanta, Yi amfani da shiga cikin man shafawa don sassauta da sukurori. Duba abubuwan da suka zana da bawul, kuma maye gurbinsu idan sun lalace.

Taka 4: Sauya tsohon Washer tare da sabon Washer. Sabbin turs da kusan daidai suke da tsoffin washers gaba ɗaya suna kiyaye famfo daga dripping. Hakanan ya kamata ku kula da ko tsohuwar gasket yana da bevel ko lebur, kuma maye gurbinsa da sabon sabon abu. GASKET da aka tsara kawai don ruwan sanyi zai ɗauka da ƙarfi lokacin da ruwan zafi yake gudana ta hanyar, Tarewa daga saman ruwa da rage kwararar ruwan zafi. Wasu gas na iya aiki a cikin ruwan zafi da sanyi, Amma ya kamata ku tabbatar cewa tashar tsibirin da kuka saya daidai yake da na ainihi.

Taka 5: Fix the new gasket to the valve core, sannan sai a sake sanya sassan a cikin famfula. Rotate the spool clockwise. Bayan spool yana cikin wurin, sake kunna goro. Be careful not to scratch the metal with the wrench.

Taka 6: Reinstall the handle and put the button or disc back. Turn on the water supply again and check for leaks.

2. Water tap leakage caused by the sealing ring of the tap

Dripping occurs when the faucet is closed; water leakage occurs when there is water flowing through the faucet. If you see water pouring from around the handle, your faucet is leaking; the first thing to do is to make sure that the packing nut of the faucet is tight, but be careful not to scratch the nut with pliers or a wrench.

Tools: adjustable wrench, replacement faucet seal, petroleum jelly.

If you find that the cause of the water leakage is not the loose nut, then you need to replace the sealing ring. Zoben zobe na famfo na iya zama mai ɗaure ƙogara mai ƙarfi wanda ya ƙunshi ɗaya ko fiye da ƙirar roba mai siffa, ko zai iya zama wani abu kamar kirtani ko waya mai laushi wanda aka lullube kusa da bawul din a karkashin goro. Lokacin da aka maye gurbin hatimi na famfo, Bi matakan da ke ƙasa:

Taka 1: Kashe ruwan da ruwa kuma cire jingina.

Taka 2: Undscrew unping goro, Cire goro da kuma tsohon rufewa daga bawul.

Taka 3: Sanya sabon zobe. Idan kana amfani da kayan zangar ido, Kunsa shi a kusa da bawul din 'yan lokuta. Idan abu ne mai zango kamar waya mai laushi, kawai kunsa kusa da bawul din sau daya.

Kafin ka sake farfadowa da famfon ruwa, Aiwatar da murfin bakin ciki na petrooleum jelly zuwa zaren bawul na bawul din da kuma tattara goro.

3. Ruwa lalacewa ta hanyar kujerar bawul na famfo

Idan ka canza gasket ɗin kuma har yanzu drips, Sannan akwai matsala tare da bawul din bawul na famfo. Jirgin ruwa mai lalacewa na iya haifar da kujerar bawul ɗin da za a sawa ta hanyar ƙarfe bawul din baƙin ƙarfe ya kuma zama mara daidaituwa, ko ajiya na sunadarai a cikin ruwa na iya samar da ragowar, wanda ke hana gasket daga gaba daya matuka tare da kujerar bawul.

Yadda za a gyara wurin zama na fashewa? I mana, Kuna iya maye gurbin gaba ɗaya na famfo. Wani zaɓi shine kawai maye gurbin mai riƙe famfon. Idan kuna da kayan aikin da ake kira wrench, Sannan cire tsohon wurin zama abu ne mai sauki. Sanya wuldar wurin zama mai tsayi a cikin kujerar bawul, sannan ka juya shi da karfi. Da zarar kun cire tsohon kujerun bawul, Tabbatar cewa sabon kujerar bawul ɗin da kuka saya daidai yake da ainihin. Idan ba za a iya cire wurin zama ba, Saka murfin wurin zama wanda zai iya zamewa cikin daidai matsayin tsohon wurin zama kuma ya samar da hatimi. Abubuwa biyu na bawul na bawul ko sanders waɗanda zasu iya lalata kujerun da suka dace.

Wani zaɓi shine amfani da wurin zama ko Sander, wanda shine kayan aiki mai araha wanda zai iya lalata wurin zama. Lokacin amfani da wannan kayan aiki, Yi hankali da yin amfani da shi tsawon ko kuma amfani da karfi da yawa, Saboda kujerar bawul ɗin an yi shi da ƙarfe mai taushi, kuma zaka iya sa shi a sauƙaƙe shi da yawa.

Lokacin amfani da yashi, Da farko cire valve valve, kuma saka wani bawul ɗin ya sauka cikin kujerar bawul a jikin dutse. Juya kayan aikin agogo da yawa tare da karfi na matsakaici. Sannan yi amfani da zane don goge tsaftace kavings daga cikin kujerar bawul.

4. O-zobe na famfon ruwa na iya haifar da famfon ruwa zuwa leak

Da famfo a cikin dafa abinci yana da o-zobba ɗaya ko sama da haka don hana ruwa daga ji. Idan o-ring din ya gaji, Za ku ga ruwa mai gudana daga ƙasan mafita a duk lokacin da ka kunna a kan famfula.

Tools: adjustable wrench, bututun ruwa, Sauyawa O-dimped.

Matakai don maye gurbin O-ring:

Taka 1: Kashe ruwa, Juya Counterclockwilon kuma cire goro mai cike da goro wanda yake gyara mafitar ruwa. Tabbatar ka kunsa ko tef don hana shi a kan dunƙule ko wrenches.

Taka 2: Bayan cire goro mai zagaye, dauke da ruwa a sama ka dauke shi daga cikin wurin zama daga ruwa. Kuna iya ganin waɗannan zobba a cikin wurin zama na ruwa.

Taka 3: Maye gurbin zobe mai matsala tare da sabon girman ɗaya. Sake tara famfon.