วิธีแก้ปัญหาการรั่วไหลของก๊อกน้ำ？

Common three types of faucet leakage

1.Causes of faucet leakage at the water outlet: It is caused by the wear of the axial gasket in the faucet.

ใช้คีมคลายและถอดต่อมออก, ถอดปะเก็นเพลาออกด้วยคลิป, และแทนที่ด้วยอันใหม่.

2.Causes of faucet leakage in the lower part of the faucet: This is caused by the wear of the triangular seal inside the gland.

คุณสามารถคลายสกรูเพื่อถอดจอบออกได้, แล้วคลายต่อม, then remove the gland inside the triangular seal shop and replace it with a new one.

3.การรั่วไหลที่ข้อต่อ: โดยทั่วไป, the cap nut is loose. ในเวลานี้, you can retighten the cap nut or replace it with a new O-ring.

Four solutions

Regarding the water leakage repair at the faucet joint, the reason for the faucet leakage is caused by the damage of the water sealing tape of the faucet part (fixed screw).

ดังนั้น, just use the wrench to remove the faucet and re-roll the new water-stop tape at the place where the screws are fixed.

The following are the maintenance steps:

1. อันดับแรก, tighten the faucet and use a wrench to turn the faucet counterclockwise.
2. Thread the hole outward and wind it 5-6 times with the wind-printing tape on the threaded part.
3. See if the faucet has been adjusted and the Allen wrench is inserted in the direction of the clock.
4. After the installation is complete, try turning on the main switch and check to see if it will leak.