12 Years Professional Faucet Manufacturer

E-mail:info@vigafaucet.com

Tel:+86-750-2738266

Blog

How to replace a kitchen faucet

Learn how to change a kitchen faucet

If you happen to’re considering of changing your kitchen faucet by yourself, it is not as loopy as it could sound. In truth, changing a kitchen faucet is a reasonably simple job in case you plan proper, prep your instruments upfront and observe a couple of different knowledgeable guidelines of thumb.

However right here’s a newsflash for first-timers: “Plumbing tasks typically not often go precisely like they need to,” plumbing knowledgeable Gary Wentz, editor-in-chief of Family Handyman journal, instructed TODAY Home.

Typically, it’s the unpredictable and unseen elements that trigger issues. Plan on changing your faucet throughout retailer hours, suggests Wentz. “Likelihood is higher than 50-50 you’ll want not less than yet one more half for this methods to change a kitchen faucet venture,” he stated.

Listed below are a couple of extra tips about methods to set up a brand new kitchen faucet whereas avoiding any plumbing bloopers.

Putting in a brand new faucet is not rocket science, however it should take a while. Household Handyman

 

How to replace a kitchen faucet

 

What you will want:

A basin wrench, which has a protracted deal with, will come in useful in terms of changing a faucet. Household Handyman

What to do earlier than you begin:

  1. Before you purchase a brand new faucet, poke your head beneath the sink and measurement up the job a bit bit. Seize a flashlight and take a very good take a look at the underside of the sink so you understand what you’re working with. One crucial step of fixing out a faucet is loosening the present nuts which might be presently holding your faucet in place. In the event that they’re corroded, you’ll be able to assume it’ll be a battle to take away, so you might have considered trying a basin wrench useful to attempt to budge them.
  2. Take inventory of the tap you’ve gotten in place. If you happen to’re heading to a {hardware} or home-improvement retailer, take into account taking an image of your faucet and basin to indicate a plumbing salesperson. They’ll affirm if the tap you’d like to put in will work with the sink you’ve gotten.
  3. Whereas most new taps have new supply lines already related to them, Wentz suggests taking the time to measure for brand spanking new provide strains simply in case. “It’s a nasty thought to reuse the outdated ones,” stated Wentz. “Changing them simply is sensible. They’ve restricted life. In case your new faucet doesn’t embody provide strains connected to it, then you should purchase new ones and measure them forward of time.”
In the case of putting in your new faucet, be sure there’s loads of gentle to see the underside of the basin. Household Handyman

Directions for changing the tap:

  1. Make it a precedence to learn the directions totally earlier than beginning any work. Additionally, take a second to clear every part out beneath the sink. Have one to 2 good-sized bowls or Tupperware useful to catch extra water. Once you disconnect provide strains, water will come out. To be protected, have rags useful, too.
  2. Earlier than you begin the job, flip off the shut-off valves. The water must be off earlier than you change your faucet.
  3. Ensure that the work house is nicely lit. Shiny lighting — like a camping lantern or work light — beneath the sink will make the job a lot simpler.
  4. To get began, use the basin wrench to unhinge the nuts beneath the present faucet.
  5. Wentz additionally suggests having a putty knife useful. “Once you’re prepared, very fastidiously slip it beneath the outdated faucet to interrupt it free. Its very simple to scratch the sink, so watch out and affected person,” stated Wentz.
  6. Set up the brand new faucet, per the directions.
  7. Seize your basin wrench and tighten the nuts across the faucet elements. Nevertheless, don’t make them too tight otherwise you might need issues down the road, shared Wentz. “It’s a mistake to over-tighten the nuts on the shut off valves,” stated Wentz. “Some individuals suppose that the tighter you make it, the higher however in case you twist it too arduous you’ll be able to wreck the rubber washer. Make it cozy, however not tremendous tight.”
  8. As soon as the tap is in and all items are related, take a rag and wipe down all of the tubes and pipes beneath the sink. “It’s so you understand they’re dry,” stated Wentz. “Then, flip the water again on full blast and let it run.” Wentz suggests additionally eradicating the aerator from the tap head to flush out any sediment which will have constructed up within the pipes. After a couple of minutes, flip the water off and change the aerator the place it belongs.
  9. After a couple of minutes of letting the water run, test beneath the sink and see if there are any drips creating. Wentz suggests utilizing a white tissue and working it all around the under-basin pipes and connection factors, as it should shortly reveal any water and damp spots instantly.
  10. If a leak is suspected, test the place the availability strains connect with the shut-off valves. Wentz shares: “Simply cozy them up a bit. Make them a bit tighter, however not too tight.”

As soon as this venture is completed and dusted, you would possibly really feel impressed to attempt replacing your own floors or to give you new storage solutions for your bathroom.

 

 

Prev:
Next: