VIGA Faucet Manufacturer 
“Why did I replace the entire faucet and it was still leaking? There is a problem with your faucet! I want to return it!!” Losing money, losing money, losing money, important things are said three times, all kinds of complaints require compensation! Many times, the bathroom terminal The sales store is also very wrong. I am a regular specialty store. Why should there be any problems?
A gaskiya, sometimes the water leakage of the faucet has nothing to do with the faucet itself. It may be caused by improper installation of the water hose and the faucet body. Bugu da kari, it may also be caused by problems such as aging, unstable water pressure or corrosion of the water supply hose that supplies water to the faucet. Once the water hose is cracked or burst, the consequences will be serious. Saboda haka, experts recommend checking or replacing the water hose every 1-2 shekaru.
Why does the faucet leak?
Most people think that the faucet leakage is a problem with the valve core. A gaskiya, as long as the valve core is used properly, the valve core is not prone to problems. Saboda haka, Idan ruwan sama, it should be analyzed from its essence.
— 【1 】—Water will drip after the new faucet is closed
After the new faucet is closed, dripping will appear. In such a situation, most owners will think that this is a problem with the faucet valve core. A gaskiya, the water dripping for a few seconds after the new faucet is closed is caused by the remaining water in the cavity after the faucet is closed. This is normal. But if the water is ticking for a long time, it is a faucet problem.
— 【2 】—Poor water quality
Many people don’t understand, what is the relationship between poor water quality and a leaking faucet? A gaskiya, poor water quality will cause trash to accumulate in the valve core, which can easily cause the valve core to not close tightly.
— 【3 】—Scratch on tap spool
Yayin amfani, the valve core is scratched due to the abrasion of foreign hard materials. Misali, when the water supply pipe is broken and the water is re-emerged, the water may contain rust or sand particles, which may cause the surface of the valve core to be scratched during the opening and closing process. Sealed and leaking. Saboda haka, when installing the faucet, be sure to clean up the impurities in the water pipe.
— 【4 】—Pipeline connection
The water inlet hose and the main body of the faucet leaked due to improper installation.
Uncover the cause of the leaking faucet and prescribe the right medicine!
— 【1 】—The faucet still leaks water after the valve core is closed
This phenomenon may be caused by the loosening of the pressure cap causing the valve core to become loose and unable to seal the water. The solution is to remove the handle and decorative cover, and tighten the pressure cap again. Another possibility is that the rubber ring at the bottom of the valve core is deformed. Can not seal the water, the solution is to take out the valve core, check the bottom rubber ring, reset it and reinstall it.
— 【2 】—Water seeps from around the valve core
This phenomenon may be that the spool is loose or displaced. The solution is to remove the spool and install it again.
— 【3 】—Water seeps from the middle part of the valve core
This phenomenon is that the valve core is damaged. The solution is to replace the valve core. If the faucet leaks, replace the valve core, which will inevitably increase maintenance costs.
— 【4 】—Water leakage at the bottom of the faucet
This phenomenon is generally caused by the O-ring of the water inlet pipe not being installed or deformed. The solution is to unscrew the hose. If the O-ring is not deformed, re-fit the O-ring and the water inlet pipe. Ee, if you find that the O-ring has been deformed, replace the O-ring.
Me ya kamata in yi idan leaks?
— 【1 】—The push-type faucet leaks
Taka 1. Rufe bawul na wanke ruwa. Cire ƙananan sukurori a kan ko a bayan famfon hawa don cire rike da gyaran a jikin famfon ruwa. An ɓoye wasu scals a ɓoye a ƙarƙashin maɓallin ƙarfe, Button filastik, ko zanen gado, wanda snap a cikin ko dunƙule cikin rike. Muddin ka kunna maballin, Za ku ga abin da aka makala a saman.
Taka 2: Cire rike da kuma duba sassan famfon. Yi amfani da manyan abubuwan haɗin gwiwar da aka yi amfani da su ko haɓaka daidaitawa don cire fakitin fakiti, Yin hankali da karbuwa da karfe. Juya spool ko shaft a cikin wannan shugabanci kamar yadda lokacin da ka kunna a kan famfon da ba a kafa su ba.
Taka 3: Remove the screws holding the washer. Idan ya cancanta, Yi amfani da shiga cikin man shafawa don sassauta da sukurori. Duba abubuwan da suka zana da bawul, kuma maye gurbinsu idan sun lalace.
Taka 4: Sauya tsohon Washer tare da sabon Washer. Sabbin turs da kusan daidai suke da tsoffin washers gaba ɗaya suna kiyaye famfo daga dripping. Hakanan ya kamata ku kula da ko tsohuwar gasket yana da bevel ko lebur, kuma maye gurbinsa da sabon sabon abu. GASKET da aka tsara kawai don ruwan sanyi zai ɗauka da ƙarfi lokacin da ruwan zafi yake gudana ta hanyar, Tarewa daga saman ruwa da rage kwararar ruwan zafi. Wasu gas na iya aiki a cikin ruwan zafi da sanyi, Amma ya kamata ku tabbatar cewa tashar tsibirin da kuka saya daidai yake da na ainihi.
Taka 5: Fix the new gasket to the valve core, sannan sai a sake sanya sassan a cikin famfula. Rotate the spool clockwise. Bayan spool yana cikin wurin, sake kunna goro. Be careful not to scratch the metal with the wrench.
Taka 6: Reinstall the handle and put the button or disc back. Turn on the water supply again and check for leaks.
— 【2 】—Water tap leakage caused by the sealing ring of the tap
Dripping occurs when the faucet is closed; water leakage occurs when there is water flowing through the faucet. If you see water pouring from around the handle, your faucet is leaking; the first thing to do is to make sure the packing nut of the faucet is tight, but be careful not to scratch the nut with pliers or wrench.
If you find that the cause of the water leakage is not the loose nut, then you need to replace the sealing ring. Zoben zobe na famfo na iya zama mai ɗaure ƙogara mai ƙarfi wanda ya ƙunshi ɗaya ko fiye da ƙirar roba mai siffa, ko zai iya zama wani abu kamar kirtani ko waya mai laushi wanda aka lullube kusa da bawul din a karkashin goro.
— 【3 】—Water leakage caused by valve seat of faucet
Idan ka canza gasket ɗin kuma har yanzu drips, Sannan akwai matsala tare da bawul din bawul na famfo. Jirgin ruwa mai lalacewa na iya haifar da kujerar bawul ɗin da za a sawa ta hanyar ƙarfe bawul din baƙin ƙarfe ya kuma zama mara daidaituwa, or the deposition of chemical substances in the water may form a residue, wanda ke hana gasket daga gaba daya matuka tare da kujerar bawul.
Steps: Sanya wuldar wurin zama mai tsayi a cikin kujerar bawul, sannan ka juya shi da karfi. Da zarar kun cire tsohon kujerun bawul, Tabbatar cewa sabon kujerar bawul ɗin da kuka saya daidai yake da ainihin. Idan ba za a iya cire wurin zama ba, Saka murfin wurin zama wanda zai iya zamewa cikin daidai matsayin tsohon wurin zama kuma ya samar da hatimi. Abubuwa biyu na bawul na bawul ko sanders waɗanda zasu iya lalata kujerun da suka dace.
— [4]—The O-ring of the faucet causes the faucet to leak
Da famfo a cikin dafa abinci yana da o-zobba ɗaya ko sama da haka don hana ruwa daga ji. Idan o-ring din ya gaji, Za ku ga ruwa mai gudana daga ƙasan mafita a duk lokacin da ka kunna a kan famfula.
Taka 1: Kashe ruwa, Juya Counterclockwilon kuma cire goro mai cike da goro wanda yake gyara mafitar ruwa. Tabbatar ka kunsa ko tef don hana shi a kan dunƙule ko wrenches.
Taka 2: Bayan cire goro mai zagaye, dauke da ruwa a sama ka dauke shi daga cikin wurin zama daga ruwa. Kuna iya ganin waɗannan zobba a cikin wurin zama na ruwa.
Taka 3: Maye gurbin zobe mai matsala tare da sabon girman ɗaya. Sake tara famfon.
What aspects should be paid attention to in the faucet?
◆What should be paid attention to when repairing water tap leaking?
If you repair it yourself, the first thing is to turn off the water supply. Just turn off a water supply valve near the faucet to turn off the water supply, but if the house is not equipped with a water supply valve for every faucet, you have to turn off the main water supply valve to shut off all water supply.
◆How to use the faucet correctly?
Some citizens like to tighten the faucet every time they run out of water, thinking that this will prevent water leakage. A gaskiya, the correct use of the faucet should be as light as possible to close and open as much as possible, do not vigorously rotate the faucet knob repeatedly, and should not turn the faucet too tight. Bugu da kari, the faucet should try not to hit hard objects. For the use of bathtub faucet, the metal hose of the shower head should be kept in a natural stretched state. Do not coil it on the faucet when not in use. When in use or not, be careful not to form a dead angle at the joint between the hose and the valve body to avoid breaking or damage. soci.