Manifattur tal-faucet VIGA 
“Why did I replace the entire faucet and it was still leaking? There is a problem with your faucet! I want to return it!!” Losing money, losing money, losing money, important things are said three times, all kinds of complaints require compensation! Many times, the bathroom terminal The sales store is also very wrong. I am a regular specialty store. Why should there be any problems?
Fil-fatt, sometimes the water leakage of the faucet has nothing to do with the faucet itself. It may be caused by improper installation of the water hose and the faucet body. Barra minn hekk, it may also be caused by problems such as aging, unstable water pressure or corrosion of the water supply hose that supplies water to the faucet. Once the water hose is cracked or burst, the consequences will be serious. Għalhekk, experts recommend checking or replacing the water hose every 1-2 snin.
Why does the faucet leak?
Most people think that the faucet leakage is a problem with the valve core. Fil-fatt, as long as the valve core is used properly, the valve core is not prone to problems. Għalhekk, jekk il-faucet inixxi, it should be analyzed from its essence.
— 【1 】—Water will drip after the new faucet is closed
After the new faucet is closed, dripping will appear. In such a situation, most owners will think that this is a problem with the faucet valve core. Fil-fatt, the water dripping for a few seconds after the new faucet is closed is caused by the remaining water in the cavity after the faucet is closed. This is normal. But if the water is ticking for a long time, it is a faucet problem.
— 【2 】—Poor water quality
Many people don’t understand, what is the relationship between poor water quality and a leaking faucet? Fil-fatt, poor water quality will cause trash to accumulate in the valve core, which can easily cause the valve core to not close tightly.
— 【3 】—Scratch on tap spool
During use, the valve core is scratched due to the abrasion of foreign hard materials. Per eżempju, when the water supply pipe is broken and the water is re-emerged, the water may contain rust or sand particles, which may cause the surface of the valve core to be scratched during the opening and closing process. Sealed and leaking. Għalhekk, when installing the faucet, be sure to clean up the impurities in the water pipe.
— 【4 】—Pipeline connection
The water inlet hose and the main body of the faucet leaked due to improper installation.
Uncover the cause of the leaking faucet and prescribe the right medicine!
— 【1 】—The faucet still leaks water after the valve core is closed
This phenomenon may be caused by the loosening of the pressure cap causing the valve core to become loose and unable to seal the water. The solution is to remove the handle and decorative cover, and tighten the pressure cap again. Another possibility is that the rubber ring at the bottom of the valve core is deformed. Can not seal the water, the solution is to take out the valve core, check the bottom rubber ring, reset it and reinstall it.
— 【2 】—Water seeps from around the valve core
This phenomenon may be that the spool is loose or displaced. The solution is to remove the spool and install it again.
— 【3 】—Water seeps from the middle part of the valve core
This phenomenon is that the valve core is damaged. The solution is to replace the valve core. If the faucet leaks, replace the valve core, which will inevitably increase maintenance costs.
— 【4 】—Water leakage at the bottom of the faucet
This phenomenon is generally caused by the O-ring of the water inlet pipe not being installed or deformed. The solution is to unscrew the hose. If the O-ring is not deformed, re-fit the O-ring and the water inlet pipe. Iva, if you find that the O-ring has been deformed, replace the O-ring.
What should I do if the faucet leaks?
— 【1 】—The push-type faucet leaks
Pass 1. Agħlaq il-valv tad-dħul tal-ilma. Neħħi l-viti żgħar fuq jew wara l-manku tal-faucet biex tneħħi l-manku imwaħħal fuq il-korp tal-faucet. Xi viti huma moħbija taħt buttuni tal-metall, buttuni tal-plastik, jew folji tal-plastik, li snap jew kamin fil-manku. Sakemm tixgħel il-buttuna, se tara l-kamin tal-manku fuq in-naħa ta 'fuq.
Pass 2: Neħħi l-manku u iċċekkja l-partijiet tal-faucet. Uża tnalji kbar tal-ġonta taż-żlieq jew wrench aġġustabbli biex tneħħi l-ġewż tal-ippakkjar, toqgħod attent li ma tobrox il-metall. Dawwar ir-rukkell jew ix-xaft fl-istess direzzjoni bħal meta dawwart il-faucet biex ħollhom.
Pass 3: Remove the screws holding the washer. Jekk meħtieġ, uża lubrikant penetranti biex tħoll il-viti. Iċċekkja l-viti u l-qalba tal-valv, u ibdelhom jekk ikunu bil-ħsara.
Pass 4: Ibdel il-washer il-qadim b'washer ġdid identiku. Waxers ġodda li kważi jaqblu eżattament mal-washers qodma ġeneralment iżommu l-vit milli jqattar. Għandek ukoll tagħti attenzjoni jekk is-siegla l-antika għandhiex ċanfrin jew ċatt, u ibdelha bl-istess siegla ġdida. Siegla ddisinjata biss għall-ilma kiesaħ tintefaħ b'mod vjolenti meta l-ilma sħun jgħaddi minnu, jimblokka l-iżbokk tal-ilma u jnaqqas il-fluss tal-ilma sħun. Xi gaskits jistgħu jaħdmu kemm fl-ilma sħun u kiesaħ, imma għandek tiżgura ruħek li s-siegla ta 'sostituzzjoni li tixtri hija eżattament l-istess bħal dik oriġinali.
Pass 5: Waħħal is-siegla l-ġdida mal-qalba tal-valv, u mbagħad installa mill-ġdid il-partijiet fil-faucet. Dawwar ir-rukkell lejn l-arloġġ. Wara li r-rukkell ikun f'postu, installa mill-ġdid il-ġewż tal-ippakkjar. Oqgħod attent li ma tobrox il-metall bil-wrench.
Pass 6: Erġa 'installa l-manku u poġġi l-buttuna jew id-diska lura. Ixgħel il-provvista tal-ilma mill-ġdid u iċċekkja għal tnixxijiet.
— 【2 】—Water tap leakage caused by the sealing ring of the tap
It-taqtir iseħħ meta l-faucet jingħalaq; it-tnixxija tal-ilma sseħħ meta jkun hemm ilma li jgħaddi mill-faucet. Jekk tara ilma jitferra minn madwar il-manku, il-faucet tiegħek qed inixxi; the first thing to do is to make sure the packing nut of the faucet is tight, but be careful not to scratch the nut with pliers or wrench.
Jekk issib li l-kawża tat-tnixxija tal-ilma mhix il-ġewż maħlul, imbagħad għandek bżonn tissostitwixxi ċ-ċirku tas-siġillar. Iċ-ċirku tas-siġillar tal-faucet jista 'jkun ċirku tas-siġillar issikkat magħmul minn ċirku wieħed jew aktar tal-gomma f'forma ta' O, jew tista 'tkun xi ħaġa bħal spag jew wajer tal-metall artab imgeżwer madwar il-qalba tal-valv taħt ġewż tal-ippakkjar.
— 【3 】—Water leakage caused by valve seat of faucet
Jekk tibdel is-siegla u l-faucet xorta iqattar, allura jista 'jkun hemm problema bis-sedil tal-valv tal-faucet. Siegla bil-ħsara tista 'tikkawża li s-sit tal-valv tal-faucet jintlibes mill-qalba tal-valv tal-metall u jsir irregolari, or the deposition of chemical substances in the water may form a residue, li jipprevjeni s-siegla milli tkun kompletament kompressata mas-sedil tal-valv.
Steps: Daħħal il-wrench tal-issikkar tas-sedil tal-valv fis-sedil tal-valv, u mbagħad dawwar kontra l-arloġġ. Ladarba tneħħi s-sedil tal-valv l-antik, kun żgur li s-sit il-ġdid tal-valv li xtrajt huwa eżattament l-istess bħal dak oriġinali. Jekk is-sedil ma jistax jitneħħa, daħħal għata tas-sedil li tista 'tiżżerżaq fil-pożizzjoni xierqa tas-sedil l-antik u tipprovdi siġill. Żewġ tipi ta 'rombli tas-sedil tal-valv jew sanders li jistgħu flatten sedili tal-valv milbusa.
— [4]—The O-ring of the faucet causes the faucet to leak
Il-faucet fil-kċina għandu O-ring wieħed jew aktar biex jipprevjeni li l-ilma joħroġ madwar l-iżbokk. Jekk l-O-ring ikun mikula, tara l-ilma joħroġ mill-qiegħ tal-iżbokk kull darba li tixgħel il-faucet.
Pass 1: Itfi l-provvista tal-ilma, dawwar kontra l-arloġġ u neħħi l-ġewż tal-akkoppjar bil-kamin li jiffissa l-iżbokk tal-ilma. Kun żgur li tgeżwer il-ġewż bit-tejp biex tevita li tinħaraq minn tnalji jew wrenches.
Pass 2: Wara li tneħħi l-ġewż tal-akkoppjar, erfa' l-iżbokk tal-ilma 'l fuq u oħroġ mis-sit tal-ħruġ tal-ilma. Tista 'tara dawn iċ-ċrieki fis-sedil tal-ħruġ tal-ilma.
Pass 3: Ibdel iċ-ċirku problematiku b'wieħed ġdid tal-istess daqs. Erġa' arma l-faucet.
What aspects should be paid attention to in the faucet?
◆What should be paid attention to when repairing water tap leaking?
If you repair it yourself, the first thing is to turn off the water supply. Just turn off a water supply valve near the faucet to turn off the water supply, but if the house is not equipped with a water supply valve for every faucet, you have to turn off the main water supply valve to shut off all water supply.
◆How to use the faucet correctly?
Some citizens like to tighten the faucet every time they run out of water, thinking that this will prevent water leakage. Fil-fatt, the correct use of the faucet should be as light as possible to close and open as much as possible, do not vigorously rotate the faucet knob repeatedly, and should not turn the faucet too tight. Barra minn hekk, il-faucet għandu jipprova ma jolqotx oġġetti iebsin. Għall-użu ta 'faucet bathtub, il-pajp tal-metall tar-ras tad-doċċa għandu jinżamm fi stat naturali stirat. Tgħaqqadx fuq il-faucet meta ma tkunx qed tintuża. Meta jintuża jew le, oqgħod attent li ma tifformax angolu mejjet fil-ġonta bejn il-pajp u l-korp tal-valv biex tevita tkissir jew ħsara. pajp.