Proizvajalec pipe VIGA 
“Why did I replace the entire faucet and it was still leaking? There is a problem with your faucet! I want to return it!!” Losing money, losing money, losing money, important things are said three times, all kinds of complaints require compensation! Many times, the bathroom terminal The sales store is also very wrong. I am a regular specialty store. Why should there be any problems?
Pravzaprav, sometimes the water leakage of the faucet has nothing to do with the faucet itself. It may be caused by improper installation of the water hose and the faucet body. Poleg tega, it may also be caused by problems such as aging, unstable water pressure or corrosion of the water supply hose that supplies water to the faucet. Once the water hose is cracked or burst, the consequences will be serious. Zato, experts recommend checking or replacing the water hose every 1-2 leta.
Why does the faucet leak?
Most people think that the faucet leakage is a problem with the valve core. Pravzaprav, as long as the valve core is used properly, the valve core is not prone to problems. Zato, if the faucet leaks, it should be analyzed from its essence.
— 【1 】—Water will drip after the new faucet is closed
After the new faucet is closed, dripping will appear. V takšni situaciji, most owners will think that this is a problem with the faucet valve core. Pravzaprav, the water dripping for a few seconds after the new faucet is closed is caused by the remaining water in the cavity after the faucet is closed. This is normal. But if the water is ticking for a long time, it is a faucet problem.
— 【2 】—Poor water quality
Many people don’t understand, what is the relationship between poor water quality and a leaking faucet? Pravzaprav, poor water quality will cause trash to accumulate in the valve core, which can easily cause the valve core to not close tightly.
— 【3 】—Scratch on tap spool
During use, the valve core is scratched due to the abrasion of foreign hard materials. Na primer, when the water supply pipe is broken and the water is re-emerged, the water may contain rust or sand particles, which may cause the surface of the valve core to be scratched during the opening and closing process. Sealed and leaking. Zato, when installing the faucet, be sure to clean up the impurities in the water pipe.
— 【4 】—Pipeline connection
The water inlet hose and the main body of the faucet leaked due to improper installation.
Uncover the cause of the leaking faucet and prescribe the right medicine!
— 【1 】—The faucet still leaks water after the valve core is closed
This phenomenon may be caused by the loosening of the pressure cap causing the valve core to become loose and unable to seal the water. The solution is to remove the handle and decorative cover, and tighten the pressure cap again. Another possibility is that the rubber ring at the bottom of the valve core is deformed. Can not seal the water, the solution is to take out the valve core, check the bottom rubber ring, reset it and reinstall it.
— 【2 】—Water seeps from around the valve core
This phenomenon may be that the spool is loose or displaced. The solution is to remove the spool and install it again.
— 【3 】—Water seeps from the middle part of the valve core
This phenomenon is that the valve core is damaged. The solution is to replace the valve core. If the faucet leaks, replace the valve core, which will inevitably increase maintenance costs.
— 【4 】—Water leakage at the bottom of the faucet
This phenomenon is generally caused by the O-ring of the water inlet pipe not being installed or deformed. The solution is to unscrew the hose. If the O-ring is not deformed, re-fit the O-ring and the water inlet pipe. DA, if you find that the O-ring has been deformed, replace the O-ring.
What should I do if the faucet leaks?
— 【1 】—The push-type faucet leaks
Korak 1. Zaprite dovodni ventil za vodo. Odstranite majhne vijake na ali za ročajem pipe, da odstranite ročaj, pritrjen na ohišje pipe. Nekateri vijaki so skriti pod kovinskimi gumbi, plastični gumbi, ali plastične plošče, ki se zaskočijo ali privijejo vanj. Dokler vklopite gumb, na vrhu boste videli vijak ročaja.
Korak 2: Odstranite ročaj in preverite dele pipe. Za odstranitev tesnilne matice uporabite velike klešče za drsne spoje ali nastavljiv ključ, pazite, da ne opraskate kovine. Obrnite tuljavo ali gred v isto smer kot takrat, ko ste odprli pipo, da ju odvijete.
Korak 3: Remove the screws holding the washer. Če je potrebno, uporabite prodorno mazivo, da odvijete vijake. Preverite vijake in jedro ventila, in jih zamenjajte, če so poškodovani.
Korak 4: Zamenjajte staro podložko z enako novo podložko. Nove podložke, ki se skoraj popolnoma ujemajo s starimi podložkami, običajno preprečijo kapljanje iz pipe. Prav tako morate biti pozorni na to, ali ima staro tesnilo poševno ali ravno, in ga zamenjajte z istim novim tesnilom. Tesnilo, ki je zasnovano samo za hladno vodo, bo močno nabreknilo, ko skoznje teče vroča voda, blokiranje iztoka vode in upočasnitev pretoka tople vode. Nekatera tesnila lahko delujejo tako v vroči kot v hladni vodi, vendar se morate prepričati, da je nadomestno tesnilo, ki ga kupite, popolnoma enako originalnemu.
Korak 5: Pritrdite novo tesnilo na jedro ventila, in nato ponovno namestite dele v pipo. Zavrtite kolut v smeri urinega kazalca. Ko je kolut na mestu, ponovno namestite tesnilno matico. Pazite, da s ključem ne opraskate kovine.
Korak 6: Ponovno namestite ročaj in vstavite gumb ali disk nazaj. Ponovno odprite dovod vode in preverite puščanje.
— 【2 】—Water tap leakage caused by the sealing ring of the tap
Kapljanje se pojavi, ko je pipa zaprta; do puščanja vode pride, ko skozi pipo teče voda. Če vidite vodo, ki teče okoli ročaja, vaša pipa pušča; the first thing to do is to make sure the packing nut of the faucet is tight, but be careful not to scratch the nut with pliers or wrench.
Če ugotovite, da vzrok za puščanje vode ni privita matica, potem morate zamenjati tesnilni obroč. Tesnilni obroč pipe je lahko tesen tesnilni obroč, sestavljen iz enega ali več gumijastih obročev v obliki črke O., ali pa je lahko nekaj podobnega vrvici ali mehki kovinski žici, oviti okoli jedra ventila pod tesnilno matico.
— 【3 】—Water leakage caused by valve seat of faucet
Če zamenjaš tesnilo in iz pipe še vedno kaplja, potem je morda težava s sedežem ventila pipe. Poškodovano tesnilo lahko povzroči, da kovinsko jedro ventila obrabi sedež ventila pipe in postane neenakomeren, or the deposition of chemical substances in the water may form a residue, ki preprečuje, da bi se tesnilo popolnoma stisnilo s sedežem ventila.
Steps: Vstavite ključ za zategovanje sedeža ventila v sedež ventila, in ga nato zavrtite v nasprotni smeri urinega kazalca. Ko odstranite stari sedež ventila, Prepričajte se, da je nov sedež ventila, ki ste ga kupili, popolnoma enak originalnemu. Če sedeža ni mogoče odstraniti, vstavite sedežno prevleko, ki lahko zdrsne v pravilen položaj starega sedeža in zagotavlja tesnjenje. Dve vrsti valjev za sedeže ventilov ali brusilnikov, ki lahko izravnajo obrabljene sedeže ventilov.
— [4]—The O-ring of the faucet causes the faucet to leak
Pipa v kuhinji ima enega ali več O-obročev, ki preprečujejo curljanje vode okoli iztoka. Če je O-tesnilo obrabljeno, vsakič, ko odprete pipo, boste videli, da voda teče iz dna odtoka.
Korak 1: Zaprite dovod vode, zavrtite v nasprotni smeri urinega kazalca in odstranite spojno matico z navojem, ki pritrjuje odvod vode. Matico obvezno ovijte s trakom, da je ne bi opraskale klešče ali ključi.
Korak 2: Po odstranitvi spojne matice, dvignite odprtino za vodo in jo vzemite iz sedeža odprtine za vodo. Te obroče lahko vidite na sedežu za odtok vode.
Korak 3: Problematični obroč zamenjajte z novim enake velikosti. Ponovno sestavite pipo.
What aspects should be paid attention to in the faucet?
◆What should be paid attention to when repairing water tap leaking?
If you repair it yourself, the first thing is to turn off the water supply. Just turn off a water supply valve near the faucet to turn off the water supply, but if the house is not equipped with a water supply valve for every faucet, you have to turn off the main water supply valve to shut off all water supply.
◆How to use the faucet correctly?
Some citizens like to tighten the faucet every time they run out of water, thinking that this will prevent water leakage. Pravzaprav, the correct use of the faucet should be as light as possible to close and open as much as possible, do not vigorously rotate the faucet knob repeatedly, and should not turn the faucet too tight. Poleg tega, the faucet should try not to hit hard objects. For the use of bathtub faucet, the metal hose of the shower head should be kept in a natural stretched state. Do not coil it on the faucet when not in use. When in use or not, be careful not to form a dead angle at the joint between the hose and the valve body to avoid breaking or damage. hose.