Faucets are also called faucets. In addition to quality indicators such as water saving, ασφάλεια, and beauty, the amount of heavy metal precipitation in faucets has become a health and safety indicator that people are most concerned about. The Zhejiang Provincial Bureau of Quality and Technical Supervision recently spot-checked faucet products and found that the unqualified rate was 100%, and the risk of heavy metals exceeding the standard was high.
Zhejiang Provincial Quality Supervision Bureau and Ningbo Quality Inspection Institute recently conducted a special supervision and spot check on the quality of faucets in Yongkang Hardware City. Υπάρχουν 15 production companies involved, and the places of production include Shanghai, Zhejiang, Γκουανγκντόνγκ, Fujian και άλλα 4 μέρη. Υπάρχουν 15 batches of unqualified batches, and the batch unqualified rate is 100%. Among the unqualified products, όλα τα αντικείμενα “απαιτήσεις υγιεινής υλικού” δεν είχαν τεθεί σε επαφή, 14 παρτίδες του “Αντοχή στη διάβρωση της επικάλυψης και της επιμετάλλωσης” Τα αντικείμενα ήταν ανεπιφύλακτα, και 10 παρτίδες του “βαθμολόγηση” Τα αντικείμενα ήταν ανεπιφύλακτα.
Απόλυτος “απαιτήσεις υγιεινής υλικού” σημαίνει ότι τα βαρέα μέταλλα είναι συνήθως γνωστά ως υπερβαίνουν το πρότυπο, που θα βλάψει την υγεία των καταναλωτών. Η επιθεώρηση διαπίστωσε ότι μεταξύ των προϊόντων που ελήφθησαν σε δειγματοληψία αυτή τη φορά, zinc alloy materials were used as the main material of the products actually accounted for 50%. Zinc itself is a heavy metal, and excessive amounts can cause zinc fever. Δεύτερο, products with unqualified “Επικάλυψη και επιμετάλλωση αντοχή στη διάβρωση” are easy to rust after use. In addition to affecting the appearance, they may contain toxic components after corrosion. Για παράδειγμα, patina has strong toxicity.
It is reported that on December 1, 2014, το πρότυπο βρύσης που ονομάζεται “το πιο αυστηρό στην ιστορία”-GB18145-2014 “Πρότυπο βρύσης κεραμικής σφράγισης” began to be implemented. The new national standard supplements and modifies the existing standards in terms of water-saving performance and quality of faucets. Σε σύγκριση με το αρχικό πρότυπο, it increases the precipitation limits for 17 μεταλλικοί ρύποι όπως το μόλυβδο, χρώμιο, αρσενικό, μαγγάνιο, και υδράργυρος. And as a mandatory clause. Ανάμεσά τους, το ποσό “μόλυβδος” that has attracted much attention is specified to be no more than 5 μικρογραμμάρια/λίτρο, που είναι σύμφωνο με τα τρέχοντα πρότυπα των ΗΠΑ και είναι το υψηλότερο στον κόσμο. Το νέο πρότυπο ισχύει για βρύσες όλων των υλικών.
Zhejiang Provincial Bureau of Quality Supervision reminds consumers that when purchasing faucet products, Θα πρέπει να αγοράζουν εξειδικευμένα προϊόντα που πωλούνται σε κανονικά κανάλια και παράγονται από τακτικούς κατασκευαστές, and it is best to choose products produced according to the new standard after December 1, 2014. Choose a faucet with copper alloy and stainless steel as the main material; the spray surface structure should be fine, smooth and uniform, and there should be no defects such as sagging, bottoming, και τα λοιπά., and there is no burr or grit feeling on the hand; visually inspect the thread surface for obvious dents, broken teeth, και τα λοιπά. For defects, it is recommended to choose thread with wall thickness.