Gwneuthurwr Faucet VIGA 
Faucets are divided into basin faucets, faucets cawod, thermostatic faucets, etc. The maintenance methods of these different types of faucets are also slightly different.
Basin Faucet
When buying a single-handle basin faucet, you should pay attention to the diameter of the outlet. Except for TOTO basins, most of them are national standard products on the market. Most of GROHE’s basin faucets are hard pipe water inlets, so you should pay attention to the height of the upper nozzle, 35 working points** from the basin down is appropriate. Yn ystod y gosodiad, an angle valve dedicated to Grohe must be selected, a rhaid gosod y falf ongl i'r pibellau dŵr poeth ac oer o'r wal. Pan ddarganfyddwch fod pellter rhwng y falf ongl a'r bibell ddŵr ar y faucet, go to your store at the time to purchase a special extension pipe for the GROHE faucet to connect it.
Cofiwch, rhaid i chi beidio â defnyddio pibellau dŵr eraill i gysylltu, oherwydd os yw'r pwysedd dŵr yn uchel, bydd yn disgyn yn hawdd ac yn gollwng dŵr, achosi colled i chi. Os yw'r bibell fewnfa yn rhy hir i fod yn fwy na'r bibell allfa, the part can be cut off according to your needs. Os nad yw'r ongl yn briodol, you can bend it to the position you need. Cofiwch: Don’t bend to 90 degrees or greater than hard. When installing the basin to drain, please do not forget to purchase the small connector of the faucet (short-circuit the faucet).
Gawod, faucet bathtub (wall hanging)
After you buy a shower, bathtub, or wall-mounted faucet, you can choose a suitable height to bury the water pipe. The distance between the hot and cold water pipes must reach 15 work points. You must not forget to flush the water pipe before installation to avoid excessive water quality and damage to the faucet. If the elbow between the faucet and the wall joint is too long, you can cut off a part of the 4-point wire. Cofiwch: the 6-point wire connected to the faucet does not seem to be cut randomly.
Cawod guddiedig, faucet bathtub
Ar ôl prynu faucet cudd, yn gyffredinol mae craidd falf y faucet wedi'i gladdu ymlaen llaw yn y wal. Be sure to pay attention to the thickness of the bathroom wall before embedding. Os yw'r wal yn rhy denau, the spool cannot be embedded. Do not remove the plastic protective cover of the valve core easily when embedding, so as not to damage the valve core due to cement and other chores. Yn ychwanegol, dylech dalu sylw at y fyny ac i lawr, cyfarwyddiadau chwith a dde'r sbŵl wrth fewnosod y sbŵl i osgoi'r sbŵl anghywir.
Faucet cawod
After you install the shower and bathtub faucets, don’t forget the filter in the shower pipe when you need to install the shower. When installing the shower, the water pressure must not be too high, generally 1&mDASh;—3 kg is the best, not more than 5 kg. Os yw'r pwysedd dŵr yn rhy uchel, the water flow restrictor in the valve core of the faucet can also be opened to reduce the water pressure, which can also achieve the effect of water saving.
Faucet thermostatig
Cyn gosod y faucet thermostatig, please check whether the water pipe is hot on the left and cold on the right. Remember not to connect the hot and cold water pipes wrongly to prevent the faucet from not working properly. Ni all gwresogyddion dŵr nwy a solar ddefnyddio faucets thermostatig oherwydd bod y pwysedd dŵr yn rhy isel. Don’t forget to install the hot and cold water filter when installing the thermostatic faucet.
Daily maintenance
In the process of using the faucet, it is necessary to frequently maintain and clean the scale on the surface of the faucet and the water sand in the spout to protect the chrome layer on the surface of the faucet as bright as new (GROHE special cleaning fluid, special cleaning cloth). Do not use rough towels and cloths to wipe the faucet, so as not to scratch the chrome layer, and do not touch the faucet with acid-alkaline items to avoid destroying its brightness.