General Administration Of Market Supervision Sampling 466 Batches Of Bathroom-Related Products, Found That 40 Batches Failed

ໂຮງຮຽນທຸລະກິດຫ້ອງນ້ໍາ

According to the General Administration of Market Supervision website on May 28, ບໍ່ດົນມານີ້, the General Administration of Market Supervision organized 38 kinds of product quality national supervision and sampling, sampling products including sanitary ceramics (facial washers), ລະບາຍນ້ໍາຊັ້ນ, toilet pressure flush valve, right angle valve and other bathroom-related products a total of 466 ຕໍ່ສູ້, found 40 ກຸ່ມຜະລິດຕະພັນລົ້ມເຫລວ. ໃນບັນດາພວກເຂົາ, there are unqualified products from well-known brand affiliated enterprises, it is worth drawing attention to.

ສຸຂາພິບານ (washers).

27 batches ລົ້ມເຫລວ, the product overflow function into the “ຕີ​ຍາກ​ທີ່​ສຸດ​”

According to the General Administration of Market Regulation website notice, the total sampling of 10 ແຂວງ (ເມືອງ) 249 ວິສາຫະກິດຜະລິດ 249 batches of sanitary ceramics (washers) ຜະລິດຕະພັນ, 27 batches of products found unqualified, unqualified rate of 10.8%, the same as the last sampling. The sampling in the industrial zone of Chaozhou City, ແຂວງກວາງຕຸ້ງ, sampled 190 ວິສາຫະກິດ, ບັນຊີສໍາລັບ 76.3% ຂອງຈໍານວນທັງຫມົດ.

The focus on the maximum allowable deformation, water absorption, crack resistance, overflow function, load resistance and other five items were inspected. ໃນບັນດາພວກເຂົາ, 15 batches of products failed the overflow function, mainly because the product’s overflow waterway design is unreasonable. Some manufacturers in order to increase the decorative effect, increase in the overflow mouth of the washer at a variety of hollow pattern overflow ring, affecting the overflow capacity of the product. 10 batches of products failed water absorption, mainly due to inappropriate ratios of raw materials or the production process of sintering temperature, firing time control is not good, resulting in the product is not dense enough. ອື່ນ 3 batches of products failed the maximum allowable deformation.

ຊັ້ນລະບາຍນ້ໍາ.

7 batches of unqualified, involving Kohler affiliates

The sampling of 96 batches of floor drain products produced by 96 ວິສາຫະກິດໃນ 8 ແຂວງ (ເມືອງ), 7 batches ຂອງຜະລິດຕະພັນໄດ້ຖືກພົບເຫັນວ່າບໍ່ມີເງື່ອນໄຂ, with a failure rate of 7.3%.

ໃນບັນດາຜະລິດຕະພັນທີ່ບໍ່ມີເງື່ອນໄຂ, 5 batches were detected to have unqualified drainage flow. They can not quickly drain the water into the pipe, mainly due to the unreasonable design of the product structure, the effective water outlet area of the drain and the floor drain grate overwater area ratio is too small, the screen aperture is too small or the drainage flap opening angle of the floor drain is not enough. ອື່ນ 2 batches of products failed the sealing performance and overflow prevention project, mainly due to improper selection of sealing materials or unreasonable structural design of connecting parts. It is worth mentioning that, among the companies whose products were found to be unqualified, there is a company named “Zhuhai Kohler Kitchen & Bath Products Co. According to the enterprise search, the investor of the enterprise is “Kohler (ຈີນ) Investment Ltd.”, with its own brand “JADE”, the unqualified products are “JADE floor drain”.

Valves.

4 batches ລົ້ມເຫລວ, the failure rate of 4.0%

A total of six provinces (ເມືອງ) 101 ວິສາຫະກິດຜະລິດ 101 batches of sanitary ware and heating pipes with right angle valve products. 4 ກຸ່ມຜະລິດຕະພັນລົ້ມເຫລວ, the failure rate of 4.0%. Failed products are thread accuracy is not up to standard. It is reported that the thread accuracy is not qualified will lead to a reduction in link strength, self-sealing performance, or will lead to leakage, loosening and other situations.

Pressure flushing valve for toilets.

2 batches ລົ້ມເຫລວ, failure rate of 10.0%

The total sampling of Fujian Province, ແຂວງກວາງຕຸ້ງ, ແຂວງ Hebei, Zhejiang Province and other four provinces 20 ວິສາຫະກິດຜະລິດ 20 batches of toilet pressure flush valve products. They found 2 ກຸ່ມຜະລິດຕະພັນລົ້ມເຫລວ, the failure rate of 10.0%, ລົງ 15.8 percentage points from the last sampling. The focus on surface quality, dimensional characteristics, sealing performance and other 27 items were inspected. The problems found in the random inspection is that 2 batches of products flushing water consumption and operational performance failed.