市場監督管理總局抽檢 466 批量衛浴相關產品, 發現了 40 批次失敗

衛浴商學院

According to the General Administration of Market Supervision website on May 28, recently, the General Administration of Market Supervision organized 38 kinds of product quality national supervision and sampling, sampling products including sanitary ceramics (facial washers), 地漏, toilet pressure flush valve, right angle valve and other bathroom-related products a total of 466 批次, 成立 40 批次產品不合格. 他們之中, there are unqualified products from well-known brand affiliated enterprises, it is worth drawing attention to.

衛生陶瓷 (washers).

27 批次失敗, the product overflow function into the “hardest hit”

According to the General Administration of Market Regulation website notice, the total sampling of 10 省份 (城市) 249 企業生產的 249 batches of sanitary ceramics (washers) 產品, 27 batches of products found unqualified, unqualified rate of 10.8%, the same as the last sampling. The sampling in the industrial zone of Chaozhou City, 廣東省, sampled 190 企業, 佔 76.3% 總計.

The focus on the maximum allowable deformation, water absorption, crack resistance, overflow function, load resistance and other five items were inspected. 他們之中, 15 batches of products failed the overflow function, mainly because the product’s overflow waterway design is unreasonable. Some manufacturers in order to increase the decorative effect, increase in the overflow mouth of the washer at a variety of hollow pattern overflow ring, affecting the overflow capacity of the product. 10 batches of products failed water absorption, mainly due to inappropriate ratios of raw materials or the production process of sintering temperature, firing time control is not good, resulting in the product is not dense enough. 其他 3 batches of products failed the maximum allowable deformation.

地漏.

7 batches of unqualified, involving Kohler affiliates

The sampling of 96 batches of floor drain products produced by 96 企業在 8 省份 (城市), 7 發現批次產品不合格, with a failure rate of 7.3%.

不合格產品中, 5 batches were detected to have unqualified drainage flow. They can not quickly drain the water into the pipe, mainly due to the unreasonable design of the product structure, the effective water outlet area of the drain and the floor drain grate overwater area ratio is too small, the screen aperture is too small or the drainage flap opening angle of the floor drain is not enough. 其他 2 batches of products failed the sealing performance and overflow prevention project, mainly due to improper selection of sealing materials or unreasonable structural design of connecting parts. 值得一提的是, among the companies whose products were found to be unqualified, there is a company named “Zhuhai Kohler Kitchen & Bath Products Co. According to the enterprise search, the investor of the enterprise is “科勒 (中國) Investment Ltd.”, with its own brand “JADE”, the unqualified products are “JADE floor drain”.

Valves.

4 批次失敗, the failure rate of 4.0%

A total of six provinces (城市) 101 企業生產的 101 batches of sanitary ware and heating pipes with right angle valve products. 4 批次產品不合格, the failure rate of 4.0%. Failed products are thread accuracy is not up to standard. It is reported that the thread accuracy is not qualified will lead to a reduction in link strength, self-sealing performance, or will lead to leakage, loosening and other situations.

Pressure flushing valve for toilets.

2 批次失敗, 故障率 10.0%

The total sampling of Fujian Province, 廣東省, 河北省, Zhejiang Province and other four provinces 20 企業生產的 20 batches of toilet pressure flush valve products. They found 2 批次產品不合格, the failure rate of 10.0%, 向下 15.8 percentage points from the last sampling. The focus on surface quality, dimensional characteristics, sealing performance and other 27 items were inspected. The problems found in the random inspection is that 2 batches of products flushing water consumption and operational performance failed.