About   Contact    |    



How to Mend Your Kitchen Faucet – Full Guide

How to Mend Your Kitchen Faucet - Full Guide - Blog - 1

Most everyone faces the problem of leaking kitchen faucets, and learning the correct maintenance skills and tools will come in handy during difficult times. All you need to do is find the correct replacement part. You also need the right tools on hand, including allen wrenches, large slip joint pliers, and screwdrivers.

If you decide to repair a kitchen faucet, first check where the faucet drips from. Once you have determined whether the faucet is dripping from the bottom or the end of the water outlet, use the shut-off valve under the sink to turn off the water supply to the faucet. If it does not exist, turn off the main water valve of the house. To release the water pressure, turn on the faucet in the middle position.

In addition, cover the drain pipe to avoid losing small parts in the drain pipe. When removing parts from the faucet, remember the order and location of the parts. Record a video of the entire process or arrange the parts to make the reassembly process easier. After removing all parts, check for degraded gaskets or mineral deposits inside the valve. Use fine nylon and/or vinegar to clean parts and remove mineral deposits.

In case  the water flow is slow, use a screwdriver to clean the clogged tap hole. You can also improve the water flow by unscrewing the aerator and cleaning it thoroughly. Before reassembling the faucet, slightly open the valve to flush out any debris found during the cleaning process. After reassembling the faucet, gradually open the valve when the faucet is opened in the center position. Let the water flow from the faucet to remove any air in the pipe.

Finding the correct replacement parts is another important step in repairing faucets. If you know the model of the faucet, you can find replacement parts online. Or you can take the faulty parts to your local hardware store or buy a repair kit from your company. If you still cannot find them, please contact the faucet manufacturer and seek guidance.

The leak at the bottom of the nozzle is caused by the wear of the O-ring under the nozzle. Swing and pull up to remove them from the nozzle for replacement. In the rotating ball faucet, if water leaks from the bottom of the handle, remove the handle and use a wrench to tighten the ring. In the cartridge faucet, if there is a problem with dripping or mixing of hot and cold water, replace the O-ring on the cartridge or cartridge faucet. The ceramic disc faucet contains a disc that controls the flow of water.

These faucets are reliable and hardly need repairs. However, leaks in ceramic disc faucets are difficult to repair because they may be caused by worn rubber seals or disc rupture. Since it is difficult to find a broken disc, please replace the seal first. If the problem persists, please take out the ceramic disc and find a replacement part from a plumbing supply store.



Live Chat
Leave a message