VIGA Musluk Üreticisi 
Faucets are also called faucets. In addition to quality indicators such as water saving, emniyet, and beauty, the amount of heavy metal precipitation in faucets has become a health and safety indicator that people are most concerned about. The Zhejiang Provincial Bureau of Quality and Technical Supervision recently spot-checked faucet products and found that the unqualified rate was 100%, and the risk of heavy metals exceeding the standard was high.
Zhejiang Provincial Quality Supervision Bureau and Ningbo Quality Inspection Institute recently conducted a special supervision and spot check on the quality of faucets in Yongkang Hardware City. Var 15 production companies involved, and the places of production include Shanghai, Zhejiang, Guangdong, Fujian ve diğerleri 4 yer. Var 15 batches of unqualified batches, and the batch unqualified rate is 100%. Among the unqualified products, tüm öğeleri “Malzeme Hijyen Gereksinimleri” vasıfsızdı, 14 partiler “Kaplama ve kaplamanın korozyon direnci” öğeler niteliksizdi, Ve 10 partiler “işaretleme” öğeler niteliksizdi.
Niteliksiz “Malzeme Hijyen Gereksinimleri” ağır metallerin genel olarak standardı aştığı bilindiği anlamına gelir, Tüketici sağlığına zarar verecek. Denetimde bu sefer numune alınan ürünler arasında, zinc alloy materials were used as the main material of the products actually accounted for 50%. Zinc itself is a heavy metal, and excessive amounts can cause zinc fever. ikinci olarak, products with unqualified “kaplama ve kaplama korozyon direnci” are easy to rust after use. In addition to affecting the appearance, they may contain toxic components after corrosion. Örneğin, patina has strong toxicity.
It is reported that on December 1, 2014, musluk standardı denir “Tarihin en katı”-GB18145-2014 “Seramik Sızdırmazlık Levha Musluk Standardı” began to be implemented. The new national standard supplements and modifies the existing standards in terms of water-saving performance and quality of faucets. Orijinal standartla karşılaştırıldığında, it increases the precipitation limits for 17 kurşun gibi metal kirleticiler, krom, arsenik, manganez, ve cıva. And as a mandatory clause. Aralarında, miktarı “yol göstermek” that has attracted much attention is specified to be no more than 5 mikrogram/litre, mevcut ABD standartlarıyla tutarlıdır ve dünyanın en yüksek standardıdır.. Yeni standart tüm malzemelerden yapılmış musluklara uygulanıyor.
Zhejiang Provincial Bureau of Quality Supervision reminds consumers that when purchasing faucet products, normal kanallarda satılan ve düzenli üreticilerin ürettiği kaliteli ürünleri satın almalılar, and it is best to choose products produced according to the new standard after December 1, 2014. Choose a faucet with copper alloy and stainless steel as the main material; the spray surface structure should be fine, smooth and uniform, and there should be no defects such as sagging, bottoming, vesaire., and there is no burr or grit feeling on the hand; visually inspect the thread surface for obvious dents, broken teeth, vesaire. For defects, it is recommended to choose thread with wall thickness.