I-VIGA Faucet Manufacturer 
Faucets are also called faucets. In addition to quality indicators such as water saving, ukuphepha, and beauty, the amount of heavy metal precipitation in faucets has become a health and safety indicator that people are most concerned about. The Zhejiang Provincial Bureau of Quality and Technical Supervision recently spot-checked faucet products and found that the unqualified rate was 100%, and the risk of heavy metals exceeding the standard was high.
Zhejiang Provincial Quality Supervision Bureau and Ningbo Quality Inspection Institute recently conducted a special supervision and spot check on the quality of faucets in Yongkang Hardware City. Bangu 15 production companies involved, and the places of production include Shanghai, Zhejiang, I-Guangdong, Fujian nokunye 4 izindawo. Bangu 15 batches of unqualified batches, and the batch unqualified rate is 100%. Among the unqualified products, zonke izinto ze “Izidingo Zokuhlanzeka Kwezinto Ezibonakalayo” bekungafaneleki, 14 ama-batches we “ukumelana nokugqwala kokuhlanganisa kanye nethanga” Izinto bezingafaneleki, futhi 10 ama-batches we “ukumaka” Izinto bezingafaneleki.
-Ngafanelekile “Izidingo Zokuhlanzeka Kwezinto Ezibonakalayo” kusho ukuthi izinsimbi ezisindayo zaziwa kakhulu njengezinga leqi, okuzolimaza impilo yabathengi. Ukuhlolwa kutholakale ukuthi phakathi kwemikhiqizo esampule kulokhu, zinc alloy materials were used as the main material of the products actually accounted for 50%. Zinc itself is a heavy metal, and excessive amounts can cause zinc fever. Komzuzwana, products with unqualified “Ukuhlanganisa nokuphimbisa ukumelana kokugqwala” are easy to rust after use. In addition to affecting the appearance, they may contain toxic components after corrosion. Ngokwesibonelo, patina has strong toxicity.
It is reported that on December 1, 2014, I-Faucet Standard ebizwa ngokuthi “okuqinile kakhulu emlandweni”-GB18145-2014 “Isilondolozi se-Ceramic Seating Shice Faucet” began to be implemented. The new national standard supplements and modifies the existing standards in terms of water-saving performance and quality of faucets. Kuqhathaniswa nezinga lokuqala, it increases the precipitation limits for 17 ukungcola kwensimbi okufana nokuhola, I-Chromium, i-arsenic, mangangane, ne-mercury. And as a mandatory clause. Phakathi kwazo, inani le “hola” that has attracted much attention is specified to be no more than 5 ama-micrograms / ilitha, okuhambisana nezindinganiso zamanje zase-US futhi kuphakeme kakhulu emhlabeni. I-New Standard isebenza kuma-facets wazo zonke izinto zokwakha.
Zhejiang Provincial Bureau of Quality Supervision reminds consumers that when purchasing faucet products, kufanele bathenge imikhiqizo efanelekile ethengiswa eziteshini ezijwayelekile futhi akhiqizwa ngabakhiqizi abajwayelekile, and it is best to choose products produced according to the new standard after December 1, 2014. Choose a faucet with copper alloy and stainless steel as the main material; the spray surface structure should be fine, bushelelezi futhi umfaniswano, and there should be no defects such as sagging, -phansi, njll., and there is no burr or grit feeling on the hand; visually inspect the thread surface for obvious dents, broken teeth, njll. For defects, it is recommended to choose thread with wall thickness.