12 Years Professional Faucet Manufacturer

E-mail:info@vigafaucet.com

Tel:+86-750-2738266

Auto Release

It is just a faucet everywhere, the production process is not simple!

The practice of earning a faucet is quite easy, and the production cost and labour cost aren’t large. But faucet goods available on the market have different rates, so what’s the gap between their costs? It isn’t important whether the faucet may be utilized, why should it cost a lot to buy? Faucet casting procedure: initial, sand cores are created on a automatic hot-core box center shooter, and aluminum metal is smelted (melting gear resistance furnace). Following the aluminum alloy reaches a particular molten condition, a copper sample evaluation block is modulated by chemical investigation and delivered to Laboratory compound titration evaluation or spectroscopic evaluation, after verifying that the chemical makeup of the aluminum metal meets the prerequisites, pouring (the projecting gear is a metal-type gravity casting machine), following cooling and solidification, open the mould and discharge to wash the pouring riser, await copper water from the resistance furnace Once all of the casting is finished, the chilled casting blanks are self-inspected and delivered into the sand shaker drum to get ceramic sand cleanup. The following step is that the heat treatment of this projecting blank (pressure relief annealing), the objective of which would be to remove the internal stress produced by the casting. Faucet machining procedure: To be able to satisfy the regular assembly and disassembly and insistent batch faucet processing systems, auxiliary tooling fittings and mould cutting tools have to be manufacturing to get ready for various processing demands. First pick the jig tool and workpiece for mould modification trial processing. Following the very first bit is qualified, it’ll be officially mass-produced. Throughout the procedure, the operator performs a self-inspection, the contractor patrols the review, and performs complete inspection after conclusion. On the stress testing system, the sealing shell is fed with 0.6Mpa of atmosphere pressure, along with the tap shell is immersed in water to see if the sealing operation of every link part and the pit of the shell meets the demands. Take the coarse grinding of this faucet (No. 60 or No. 80) abrasive belt, then eliminate the coarse surface and potholes of this surface, then use the No. 180 or No. 240 abrasive belt to get your intermediate milling, grinding the surface and also trimming the outline; (No. 320 or No. 400) abrasive belts are floor few days to produce the surface often get a more perfect look, clear lines and well-balanced arrangement. Finishing is performed alongside the No. 600 abrasive belt, so the surface reaches the perfect appearance shape, and continues to be shaped as a real look thing. The surface does not have any clear trachoma and stomata flaws. Or gloss to make the surface smooth and glowing, and the traces are somewhat smoother and smoother. The manufacturing process of a little faucet is indeed complex. No wonder that all these men and women who rely on workmanship for a little measure charge a great deal of money, but in reality, laymen can not fix it.

Prev:
Next: