About   Contact    |    

HowToSolveTheProblemOfLeakingHandShower?|VIGAFaucetManufacturer

Faucet Knowledge

How to solve the problem of leaking hand shower?

We bought a shower, and sometimes encountered such a situation, after the shower was turned off, occasionally dripping, or after a period of time, suddenly dripping, this situation not only wastes water but also the sound of dripping water It’s irritating.
Cause of the problem
This usually happens, and many people think that it is a quality problem of the shower, but often after replacing the shower, this problem cannot be solved. So what is the reason for the leakage of the shower?
After the shower is turned off, the water leakage is actually the water stored in the top spray and the shower pipe. After the shower is turned off for a while, the sudden leakage is because the air pressure and atmospheric pressure in the shower are in equilibrium at the beginning, so the water inside is temporarily It will not flow out, but after a period of time it loses its balance, the water will flow out.
Solutions to water leaks
1. The shower head turns to the leak at the ball
For the leakage at the steering ball, the operation is actually very simple. We just need to open the steering ball, find the O-ring or a similar seal, and finally install the shower head.
2. Leakage at shower head handle connection
If you find that there is a leak in the handle connection of your shower head, then repurchase the shower hose and faucet directly according to the original specifications, and replace the rubber ring.
3.Grit or sediment in shower head
If the leak in your shower is caused by some deposits in the shower head, then we can first clean the shower, if necessary, soak the parts with vinegar, and scrub such parts, Take care not to damage it. If the replaced part shows signs of excessive wear, then repurchase the part. If the rotary handle does not move smoothly, the entire shower head needs to be replaced.
4. Clogged shower
Sometimes when we use the shower, we will find that the thickness of the water from the shower is mixed, and the water output will become smaller, so the shower may be blocked. Generally, the water we use contains more alkali, and scales are deposited in the outlet holes. , Causing the shower to become clogged. It is also very easy to solve. For a shower head designed with silica gel particles, just knead it gently. If the scale is serious, use a plastic bag to hold white vinegar, wrap the shower head and soak it in water for a while, then rinse it with water, so that the problem of water leakage from the shower head can be easily solved.
So for the situation we mentioned above, what you need to know is that this may not be the quality of the shower. For the specific situation of the leak, patiently find the cause of the leak and replace the worn parts in time.
How to solve the problem of leaking hand shower? - Faucet Knowledge - 1

Prev:

Next:

Live Chat
Leave a message